lamaster@ames.arpa (Hugh LaMaster) (01/09/88)
Does anyone have any recommendations for adaptors to connect a thinwire-only controller (on the back of a VAXstation) to a regular drop cable. There are already multiple repeaters in the LAN in question, so the delay due to a DEMPR could be a problem- not to mention the cost of using a DEMPR for a few workstations. All the rest of the cable plant in question is regular Ethernet.
ron@topaz.rutgers.edu (Ron Natalie) (01/12/88)
One kludge is to do the following....
====THICK CABLE=====>------T------<=======THICK CABLE=====
|
VAX
You cobble it up using N to BNC adapters.
-Ron