bruce@whiskey.USWest.COM (Bruce W. Hoylman) (03/14/89)
"Thank you" to everyone who responded to my question
concerning the interconnection of (2) Novell networks.
In summary, The simpleist thing to do is to directly connect
the two together. If both servers have the same network
number, nothing else need be done. Each server can then
be attached to as necessary.
If they are not the same (this can be determined by using
the CONFIG command from the server console), then one of
the network servers needs to be re-gened and given the
appropriate matching network number. This can be easily
done in my case during the upgrade to 2.15 (everyone
recommended this!!).
Also, a manual reference on network numbers was forwarded,
it being the Netware 286 Installation manual.
Thanks again.
------
Bruce W. Hoylman, (303)889-6624, US West Advanced Technologies
bruce@uswest.com
{....boulder}!uswat!bruce