glee@cont1.Dayton.NCR.COM (Gary Lee) (05/27/89)
We are running Novell remote async bridges across our local Micom MUX network
with no problems ( we do this to provide LAN access to persons on the campus
who are not bridged in directly ). It works fine and cost very little, but now
we are having problems with persons outside the campus who use other means (
ie, leased-lines & sattelites ) to connect to the LAN coming through the local
Micoms. The Novell error message is:
Network Error on Server SRV3 : Error Sending on Network Abort or Retry?
Of course the error messages manual is no help, so has anyone out there tried
something similar? I have a hunch that thep problem has to do with timing
because I have had the Telecomm folks verify that the async setup is the same
whether to session is local or remote. I was thinking that SHELL.CFG for the
IPX program might be worth trying, but did not know where to start ( IPX, SPX
and ticks are a bit over my head ). Any pointers or similar experiences would
be greatly appreciated.
--
* Gary M. Lee (513) 445-6607 glee@cont1.Dayton.NCR.COM *
* NCR Corporation - WHQ-3 **************************************************
* 1700 S. Patterson BLVD * "The god I believe in, is not short of cash !" *
* Dayton, Oh. 45479 * - Bono's ( U2 ) opinion of TV Evangelists *