rsnider@xrtll.UUCP (Richard Snider) (07/06/89)
I am in the search of hardware and software that will work in the following configuration: - Approx 12 PC type machines hooked together with ethernet for use with Novell network. - These same PC's with the same ethernet will also be used with SCO Xenix running from the same box that the Novell was (not at the same time). Obviously the first part is easy, but I don't know if there is anything around that will allow the PC's to become "Simple terminals" thru the ethernet so they can talk to Xenix. This stuff is being used to teach about networks so no one is trying run Both at the same time. Thanx for any suggestions you may have... Richard Snider ------------------------------------------------------------------------ Where: ..uunet!mnetor!yunexus!xrtll!rsnider Also: rsnider@xrtll.UUCP An unbreakable tool is useful for breaking other tools.
epsilon@wet.UUCP (Eric P. Scott) (07/09/89)
On the PC side, Clarkson University has a version of NCSA Telnet that will run concurrently with Novell using a packet driver. Contact Brad Clements <bkc@omnigate.clarkson.edu>. -=EPS=-