ta2@acci.com (09/30/89)
I have a number of computers on my Ethernet network that talk using
802.3 format messages. I would like to bring my SCO Xenix (2.3.1) system
into the fray. The machine that I run Xenix on, a 386 clone, already
has a Micom 5210-8 in it (since we also boot the machine under DOS.)
So, can anyone point me at a driver for a Micom 5210-8 under SCO Xenix 2.3.1?
Thanks!
--- Tom
Tom Allebrandi | Advanced Computer Consulting,Inc | Charlottesville, VA
804 977 4272 | VMS User's Network Working Group -- The DECUS UUCP people
---------- you should be able to find me somewhere in this mess -----------
Bix: ta2 | Internet: ta2@acci.com | Bitnet: ta2%esther@virginia.edu
DCS: ALLEBRANDI | DECUServe: ALLEBRANDI | Pageswapper: US142404
| UUCP: ta2@esther.uucp (...!uunet!virginia!esther!ta2)davidsen@crdos1.crd.ge.COM (Wm E Davidsen Jr) (10/03/89)
If you don't find a driver for your TCP board, wait a bit and see if the new release from SCO has support. They promised us "about five" new boards but I don't have a release date. Sure hope mine is one of them. -- bill davidsen (davidsen@crdos1.crd.GE.COM -or- uunet!crdgw1!crdos1!davidsen) "The world is filled with fools. They blindly follow their so-called 'reason' in the face of the church and common sense. Any fool can see that the world is flat!" - anon