chim@ece-csc.UUCP (Bill Chimiak) (09/05/87)
What is the status of the ANSI X3T9.5 protocol? W. Chimiak
goodloe@b11.ingr.com (Tony Goodloe) (05/26/89)
Does anyone know of a device that has FDDI-multimode compatible I/O on one side and any type of singlemode I/O on the other? The application: we need to put some FDDI/Ethernet bridges 5 km apart. That is pushing multimode a bit, so .. the need to convert to singlemode and then back on the other end. Fibronix has such a device in their literature, but it "is still in development." I got the literature in February or so - can you say "early announcement." Another company is going to have a singlemode interface for their box, but it will be a while. Can anyone help? While on the subject of electro-optics - what is so special about the FDDI optical tx/rx.It doesn't seem like 125 Mbaud is that incredibly fast. What is it that requires "FDDI" optics? Why won't others do? tony goodloe ...uunet!ingr!b11!goodloe
jh@tut.fi (Hein{nen Juha) (06/04/89)
In article <5135@b11.ingr.com> goodloe@b11.ingr.com (Tony Goodloe) writes:
Does anyone know of a device that has FDDI-multimode compatible I/O on
one side and any type of singlemode I/O on the other? The application:
we need to put some FDDI/Ethernet bridges 5 km apart.
We have an FDDI ring installed where the distance between stations is
more than 10 Km. In order to achieve the distance, a Finnish company
called SLO-Kaapeli Inc. has made us multimode/single mode converters.
The converter is now a commercial product. I don't know the price nor
remember the address of the company. Contact Jari Karttunen
(jjk@tut.fi) for more information.
--
-- Juha Heinanen, Tampere Univ. of Technology, Finland
jh@tut.fi (Internet), tut!jh (UUCP), jh@tut (Bitnet)
jjk@korppi.tut.fi (Karttunen Jari Juha) (06/07/89)
Does anyone know of a device that has FDDI- multimode compatible I/O on one side and any type of singlemode I/O on the other ... Here is the contact information to SLO-kaapeli Inc. Mr. Veli Virtanen SLO-kaapeli Inc. Hailuodontie 5 SF-90120 Oulu, Finland Tel. +358 81 225 344 Fax +358 81 221 104
scp@bpa.BELL-ATL.COM (Steve Parowski) (10/07/89)
I am looking to develop an FDDI network that is about two miles long and am in search of vendors that provide terminal equipment. I also think that some type of repeaters may be involved but I do not know who manufactures them?? If someone is familiar with this please respond. I will collate information that I receive and place it back on the NET. Thanks Steve