benderly@cs.columbia.edu (Dan Benderly) (12/21/89)
I am responsible for a Novell 2.15SFT network with a Hertz 386/25 server, and 5 attached printeers. The connections to two of the printers go through Parallel/serial covertors, although I don't think that is relevant. The problem I am having is that I can't get down-loadable fonts to work! This problem has shown up in every program I have tried -- Windows, Word, and Word Perfect, so it seems to have something to do with Novell. The same setup works on a local printer, as well as on a Lantastic network elsewhere. I'm stumped. Any ideas??? Dan benderly@cs.columbia.edu
emmo@moncam.co.uk (Dave Emmerson) (12/21/89)
In article <578@cs.columbia.edu>, benderly@cs.columbia.edu (Dan Benderly) writes: > I am responsible for a Novell 2.15SFT network with a Hertz 386/25 server, > and 5 attached printeers. The connections to two of the printers go through > Parallel/serial covertors, although I don't think that is relevant. > > The problem I am having is that I can't get down-loadable fonts to work! Could it be related to X-ON / X-OFF on your serial ports? Dave E. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~%~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ static char disclaimer[] { "These are MY opinions. My employers don't have the collective IQ to form an opinion of their own, that's what they hire me for!" } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~%~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scotth@grebyn.com (Scott Hutchinson) (12/21/89)
In article <578@cs.columbia.edu> benderly@cs.columbia.edu (Dan Benderly) writes: >I am responsible for a Novell 2.15SFT network with a Hertz 386/25 server, >and Word Perfect, so it seems to have something to do with Novell. The same >setup works on a local printer, as well as on a Lantastic network elsewhere. Ok what you need to do is have the print job set up as follows: File Contents: Byte Stream Suppress Form Feed : Yes Auto Endcap : Yes Device = HP Laserjet Mode = (re-init) Enable Timeout: Yes Timeout count : 5 or so. This works on my 2.15 SFT Server with a Laserjet series 2 downloading fonts from word perfect.
brian@ncrcan.Toronto.NCR.COM (Brian A. Onn) (12/22/89)
In article <14106@grebyn.com> scotth@grebyn.UUCP (Scott Hutchinson) writes: > Ok what you need to do is have the print job set up as follows: > > File Contents: Byte Stream > Suppress Form Feed : Yes > Auto Endcap : Yes > Device = HP Laserjet > Mode = (re-init) > Enable Timeout: Yes > Timeout count : 5 or so. > > This works on my 2.15 SFT Server with a Laserjet series 2 > downloading fonts from word perfect. This works on our network as well, 2.15, SFT Level I. We use it with downloadable fonts and Wordperfect, MS Word, Windows, etc. Brian. -- +-------------------+-----------------------------------------------------+ | Brian Onn | UUCP: ..!uunet!attcan!ncrcan!brian | | NCR Canada Ltd. | INTERNET: Brian.Onn@Toronto.NCR.COM | +-------------------+-----------------------------------------------------+