wdarden@nrtc.nrtc.northrop.com (Bill Darden <wdarden>) (03/28/90)
The following procedure will allow Leading Edge PC's to run on a Novell based PC LAN: 1. Remove the real time clock jumper from the J13 header. The first set of pins on a Model D closest to the BIOS ROM should not have a jumper because they are not used. The second set of pins on the J13 header should be the real time clock. 2. Remove the clock driver out of the config.sys file. 3. By trail and error, select the interrupt and memory addresses on the Ether card. We have modified several Model D's to work on a David Systems twisted pair Ether running Novell's Netware 2.15. Good luck, BiLL.......