pcb@gator.cacs.usl.edu (Peter C. Bahrs) (07/20/90)
Using PS/2 Model 70 and Ungermann NICPS2 ethernet board. We are also currently running Netware 2.15. I am considering getting the MD-DOS/IP system fro wisc-ware. It looks real cool. The 3 tsr's to load for their software include a hardware driver, an internet driver and some memory management stuff. I was told that the hardware driver can be replaced by a packet driver to enable their software to run with Netware. They suggested looking at the clarkson drivers. Last time I looked, there was not a driver for the NICPS2 (why, I am not sure, I have a board someone can use to modify the NIPC driver...). Question: Is there currently some sort of driver I can use to get this to work? I have a program from Ungermann Bass called etnicpw.exe. If I run this and then ipx and net3, netware runs and this is supposed to be compatible with someone elses ftp type stuff. Unfortunately, the only ftp-ish type software I have is IBM -tcpip software which will not work. Any ideas? /*----------- Thanks in advance... --------------------------------------+ | Peter C. Bahrs | | The USL-NASA Project | | Center For Advanced Computer Studies INET: pcb@gator.cacs.usl.edu | | 2 Rex Street | | University of Southwestern Louisiana ...!uunet!dalsqnt!gator!pcb | | Lafayette, LA 70504 | +-----------------------------------------------------------------------*/