rcdswal@dutrun.UUCP (Guus van der Wal) (10/22/90)
Who has experience ? We have this Artisoft LANtastic network (10Mb ethernet version). It works fine with real blue XT's, an Olivetti Primavera no problem either, but with an Olivetti M240 the redirector dies at startup. The book says: Use another IRQ level (I used IRQ3) but all other possible levels give no improvement. The book says: Look at memory regions that are already occupied, but I cannot figureout what addresses are used by the Artisoft Ethernet adapter. Neither does the AE2 driver have a parameter to change the RAM addresses. The configuration is Olivetti M240 (8086 processor) Harddisk 40 Mb Diskette drive 360 KB EGA display adapter with Paradise chips 640KB RAM The usual serial and parallel ports on the motherboard Any LANtastic guru around ?? -- Guus van der Wal Computing Centre Delft University of Technology, The Netherlands USEnet: rcdswal@dutrun.tudelft.nl BITnet: rcdswal@hdetud1.bitnet