ghelmer@dsuvax.uucp (Guy Helmer) (04/26/91)
If someone on the net can help me with info on this card, I'd sure
appreciate it. I purchased a batch of cards marked
"WD8000SL ASSY 61-600026" at the top, the boards are only about 2/3
the height and half the length of a full-size IBM PC interface board,
and almost the whole board was soldered using surface-mount devices.
Jumper block W2 has 8 pins, W4 has 8 pins, W1 has 16 pins, W3
has 12 pins, W5 has 2 pins, and W6 has 2 pins.
A Western Digital person I spoke with a while back said he couldn't
find any documents for this specific board. I would like to find out
what jumper settings set I/O port numbers, interrupt requests, and
shared RAM addresses for this board. Western Digital's StarTest program
works with the boards, but I haven't been able to determine much from
it other than the jumper settings for various interrupt requests.
Any help will be gratefully received.
--
Guy Helmer, Dakota State University Computing Services
helmer@sdnet.bitnet, dsuvax!ghelmer@wunoc.wustl.edu, wupost!dsuvax!ghelmer
"I'm a cowboy, on a keyboard I ride..."
-- with apologies to Bon Jovi