Chuck_SirVAX_Staatse@cup.portal.com (09/07/89)
Anyone know the address/telephone number to get ANSI specs? The
two that I'm looking for are:
X3T9/88-12F HSC
? SCSI-2
thanksjhart@ncrwic.Wichita.NCR.COM (Jim Hart) (09/08/89)
In article <21922@cup.portal.com> Chuck_SirVAX_Staatse@cup.portal.com writes: >Anyone know the address/telephone number to get ANSI specs? The >two that I'm looking for are: > X3T9/88-12F HSC > ? SCSI-2 > > thanks Computer & Business Manufacturers Association 311 First St. N.W. Suite 500 Washington, DC 20001 ANSI 1430 Broadway New York, NY 10018 212-642-4900 SCSI 2 is a working document only at this point. It's not ANSI approved yet. However, the current document (March 16, 1989) number is: X3T9.2/86-109 Rev. 8 X3T9/89-042. Copies can be purchased from: Global Engineering Documents 2805 McGaw Irvine, CA 92714 Refer to document X3.131-198X.
jlohmeye@entec.Wichita.NCR.COM (John Lohmeyer) (09/09/89)
In article <21922@cup.portal.com> Chuck_SirVAX_Staatse@cup.portal.com writes: >Anyone know the address/telephone number to get ANSI specs? The >two that I'm looking for are: > X3T9/88-12F HSC > ? SCSI-2 I post the following file every few months. Since both of these documents are still in the draft stage, you can't buy them from ANSI. You _may_ be able to get HSC from Global Engineering Documents. If they don't have it, contact Don Tolmie at the Los Alamos National Labs (505) 667-5502 -- he is the Vice-chairman of X3T9.3 and the document editor for HSC. Please call Global first. If they have it, Don will refer you there anyway. How to Get SCSI Standards This file has information on obtaining the various SCSI standards. American National Standard (ANSI) for Small Computer System Interface (SCSI), X3.131-1986. This approved standard is available from: American National Standards Institute 1430 Broadway New York, NY 10018 Sales Department: (212) 642-4900 The price is $25.00 each for 1-9 copies. Quantity discounts are available. If your company is a member of ANSI, you may also be eligible for a discount. The enhanced Small Computer System Interface (SCSI-2) is not an approved standard. It is a working document of the X3T9.2 Task Group that is intended to revise and enhance X3.131-1986. Copies of the most recent version of this document can be obtained from: Global Engineering Documents 2805 McGaw Irvine, CA 92714 (800) 854-7179 (714) 261-1455 Global has identified this document as X3.131-198X. (The latest revision is Rev 10b with a date of 8/22/89.) The European Computer Manufacturers Association (ECMA) has also prepared a standard on SCSI. It is known as: Standard ECMA-111 and was published in December 1985. Free copies are available from: European Computer Manufacturers Association 114 Rue du Rhone 1204 Geneva (Switzerland) Please note that Global may not have SCSI-2 Rev 10b yet -- it takes a while to get through the system. -- John Lohmeyer J.Lohmeyer@Wichita.NCR.COM NCR Corp. uunet!ncrlnk!ncrwic!entec!jlohmeye 3718 N. Rock Rd. Voice: 316-636-8703 Wichita, KS 67226 SCSI BBS 316-636-8700 300/1200/2400 24 hours