pjh@mccc.uucp (Pete Holsberg) (09/18/90)
I have a Maxtor XT-2190 and don't know how to set the DS jumpers. In fact, there's nothing marked DS at all. I think the most likely candidate is a single row of pins between U16 and U20 at the edge connector end of the PC board. The pins are numbered 1 through 6 and 5-6 were jumpered as delivered. The drive is going into an AT/386 and I need to set it as the second drive. If anyone has real info and is willing to fax it to me, I'd be mnuch obliged. 609-586-6944 Many thanks, Pete -- Prof. Peter J. Holsberg Mercer County Community College Voice: 609-586-4800 Engineering Technology, Computers and Math UUCP:...!princeton!mccc!pjh 1200 Old Trenton Road, Trenton, NJ 08690 Internet: pjh@mccc.edu Trenton Computer Festival -- 4/20-21/91