luis@ys2.uucp (Luis Chanu) (03/28/91)
I just finished picking up a STROBE 260 plotter, and am trying to communicate
with it. I has an RS-232 port, and I currently have it selected to 9600
baud, no parity, FYI.
My real question is what is it compatible with? And, does anyone have a
manual on one? ANY information would be appreciated... Please reply
via E-mail, since I normally don't read this SIG. Thank You for your
time...
-------------------------------------------------------------------------------
Luis Chanu / Awesome Possum "Live every day as if it were your last,
because one day you will be right."
UUCP: luis@ys2
or "The nice thing about standards is that
UUCP: ...grinch!luis there are so many to choose from."
Disk-Claimer: That's not your disk, that's my disk.
-------------------------------------------------------------------------------
--
-------------------------------------------------------------------------------
Luis Chanu / Awesome Possum "Live every day as if it were your last,
because one day you will be right."
UUCP: ...sun!aeras!grinch!luis