woon@plains.NoDak.edu (Sze T. Woon) (05/19/91)
Could someone help me with the jumper settings of my floppy disk drives?
I want to make the 3.5 inch drive Drive A and 5.25 inch drive Drive B.
Drive B will be an external drive and somtimes not hooked up to the PC.
I have made my own straight through cable (it has no twist in it).
First drive: Chinon
Model FB-357 Rev. B
(1.44 M , 3.5 inch)
Top
____________________________________ Default setting: PJ3 (2 and 3 shorted)
o o-o PJ13 [o o o o] ! DS0 closed
1 2 3 power
connector What is PJ3 for or do ?
How do I terminate or not terminate
this drive ?
REAR of drive
____________________________________ PS. I have been told that this drive
Bottom does not require termination.
Second drive: Chinon
Model FZ-506 Rev. A
(1.2 M , 5.25 inch)
Top / Default setting: 3,10,13 closed
______________________________________/ all others opened
13 10 3 1 This will be the last drive on the
chain ie.needs to be terminated.
D M D T
K S S E Should jumper position 1 be open
C 1 R closed ?
M
SIDE of drive
______________________________________
Bottom
Yours sincerely
Sze T. Woon Internet: woon@plains.nodak.edu
North Dakota State University UUCP: ..!uunet!plains!woon
Fargo, North Dakota Bitnet: WOON@PLAINS