kaberline@ford-vax.UUCP.UUCP (02/25/87)
I've also seen the same problem that both Mark Mendel and David Barto report. However, to add a bit more confusion, we have three systems here, all Masscomp computers with Racal-Vadic VA212 modems. The symptoms: ------------- System 1: Works just fine, no apparent problems. System 2: Exhibits the same problems the above mentioned people reported; i.e., uucico sees the remote systems id, then login prompt, then immediately reverts to garbage, and nothing sent after this will work. A direct connection (cu, kermit) works perfectly. System 3: Can't dial out at all using the RV modem, somehow uucico isn't recognizing the characters echoed back by the modem during the dialing sequence. Users can call in via the same modem, though, with no problems, so that suggests that cabling, parity, speed, etc. are correct? I might add that using an earlier (approx. 1 year old) version of uucico fixes the uucico problem of system 3, and that all systems are using functionally identical L.sys files. I'm certainly open to suggestions! Anyone (particularly with a Masscomp computer) get an RV modem to work properly with uucico? If so, I'd be interested in seeing your modem options setup and your relevant uucp files. Thanks! Steven Kaberline Ford Motor Company Scientific Research Labs Dearborn, MI 48121 kaberline@ford-vax ...ihnp4!mb2c!fmsrl7!fmsrl1!stevek (uucp) ------