[comp.dcom.modems] 2400 baud internal modem ?

sung@uw-june.UUCP (Sung Kwon Chung) (09/15/87)

I am a newcomer to this news group, and I hope this is not a "already
answered" qustion.

Is there anyone who has used (or heard about) 2400 baud internal modems
for IBM PC's?  I would appreciate your comments on their price range,
performance/cost, reliability, etc.

I have seen one in the catalog of Elek-Tek.  [They seem to handle
variety of electronic and computer items.]  Their price was $209.
I couldn't find its brand name, and I suspect it is Elek-Tek's
own one (but I am not sure about that).  I'd like your opinion about it.

Thanks,

Sung Chung
sung@june.cs.washington.edu

IKS@PSUVM.BITNET (Indra K. Singhal) (09/15/87)

In article <3110@uw-june.UUCP>, sung@uw-june.UUCP (Sung Kwon Chung) says:
>
>Is there anyone who has used (or heard about) 2400 baud internal modems
>for IBM PC's?  I would appreciate your comments on their price range,
>performance/cost, reliability, etc.
>
>I have seen one in the catalog of Elek-Tek.  [They seem to handle
>variety of electronic and computer items.]  Their price was $209.
>I couldn't find its brand name, and I suspect it is Elek-Tek's
>own one (but I am not sure about that).  I'd like your opinion about it.
>
In reply to the 1st paragraph, yes internal modems for PCs are a viable
product that range in price from $200 on up. The performance is comparable
to external modems. Personally, I recommend an external (having used both
kind). The problem with internals is the oblivion that it leaves the user in
while doing anything. There are no status lights to tell the user of ongoing
activity/inactivity. Further, since it plugged into the bus directly, it
does not allow for speed conversion benefits (run Serial port at higher
baud rate than modem) Well these are considerations.
     
It really depends on how much time and the kind of calls you expect to
make using your modem. If you are into long-distance calling, I would
recommend a modem that provides MNP 3 or above. Modems are now getting some
sort of error correction (at the host site) and  most often it is MNP. NOte
you need MNP on both ends to make use of it... If you connect alot, a
well built modem will save you lots of $$ in phone charges esp. in noisy
conditions....
     
enjoy...
-------
     
     Keep Smiling (-:-)                  --Indra K. Singhal
 >>                                                           <<
 >>  email : psuvm.bitnet!iks  | bitnet: iks at psuvm         <<
 >>  ARPA  : iks%psuvm.bitnet@wiscvm.wisc.edu                 <<
 >>  usmail: 1300 Fayette Street # 243,                       <<
 >>          Conshohocken, PA 19428-1320.                     <<
 >>  ring  : 215-646-7710 (w), 215-828-1322 (h)               <<
     

phil@sci.UUCP (Phil Kaufman) (09/15/87)

I am using an EVEREX external
2400 baud modem. It performs quite well and includes a speaker-fone.
They also make an internal version that can be found for about $200.

jons@islenet.UUCP (Jonathan Spangler) (09/20/87)

In article <8850@sci.UUCP> phil@sci.UUCP (Phil Kaufman) writes:
>
>I am using an EVEREX external
>2400 baud modem. It performs quite well and includes a speaker-fone.
>They also make an internal version that can be found for about $200.

I am the Sysop in the Honolulu area for an Opus board called HTCS BBS.
The board is being run on an Everex 24e, which works beautifully   
installed as a USR 2400. I have been very pleased with it and have  
ordered an internal Everex 2400 for my home machine.

If you would like to try it out, the number for the board is (808)531-2659
and the node number is 1:12/6 (Zone 1, Net 12, Node 6), running Opus v1.03a.
Note: I make no guarantees on line noise for long-distance calls...

Aloha,

-- 
Jonathan Spangler
UUCP:         {ihnp4,vortex,dual}!islenet!jons
OPUS/FIDONET: Sysop@(12/6) HTCS BBS (808)531-2659, 24 hrs., Honolulu

grazier@fmsrl7.UUCP (Kevin Grazier) (09/22/87)

In article <3110@uw-june.UUCP> sung@uw-june.UUCP (Sung Kwon Chung) writes:
>
>Is there anyone who has used (or heard about) 2400 baud internal modems
>for IBM PC's?  I would appreciate your comments on their price range,
>performance/cost, reliability, etc.
>

Personally, I use a USRobotics Direct 2400 modem for the PC.  Its
command language is a superset of the Hayes, and all the reviews I've
seen on it are good.  It has an additionaly feature that the Hayes
doesn't (then again, most Hayes-compatibles have this). It can be
configured to be com3 or com4, which is essential if you already have
two serial ports and don't want to disable one, as in my case.

The best thing about this modem, though, it its price.  I see it regularly
advertised for $189.00 in PC Magazine.  If you don't want to take the
hassle of paging through all the ads, a company in Pennsylvania called
Computer Mail Order (CMO) sells them for this price.  CMO's toll-free
number is 1-800-233-8950.  CMO also has a west coast outlet, but I don't 
know the phone number.

BTW, this wasn't meant to sound like a CMO advertisement, it's just that
I've dealt with them on several occasions and am very satisfied.

Hope this helps.

-- 
Kevin R. Grazier                                Have you driven a Ford, lately?
Ford Motor Company Scientific Research Labs
Advanced Powertrain Systems & Controls Engineering
uucp: {philabs | pyramid} !fmsrl7!grazier OR  grazier@fmsrl7.UUCP
VOICE: (313) 739-8586