manes@dasys1.UUCP (Steve Manes) (05/12/88)
I've been installing Telebit support into 'cu' clone source this week and ran across trouble that seems to exist in the two T-bits I've been working with. Both are brand-new with 4.0 ROMs. Trouble #1: the S7 register, on outdial, times out way faster than the value I've given it. For instance, S7=60 times out closer to half that value. To log in to the other Trailblazer using PEP and with the answer modem set to S92=1, I have to set the calling modem to as high as S7=254 to have a good chance of staying on line long enough to lock with the trailing-end PEP answer tones. Anyone run across this?? There's always a chance that the problem's somewhere in my code... just need to check. Trouble #2: logging in at PEP with 9600 baud (under Xenix) produces a REAL spasmodic display... more than I would assume with packetization. Anyone got any advice I might have missed to smooth the display a bit? -- +----- + Steve Manes + decvax!philabs!cmcl2!hombre!magpie!manes Magpie BBS: 212-420-0527 + SmartMail: manes@magpie.MASA.COM