dewey@execu.UUCP (Dewey Henize) (09/16/88)
I'd like to thank all those that responded to my plea for help and advice in setting up our telebits to our sun server. To be honest, the response was astounding! For those that are interested in the result, I basically followed up the setup that telebit gives out with a few minor mods (thanks especially to Richard Siegel). When all the system config stuff is taken care of, I put in the recommended string: AT &F S51=254 S52=2 S54=3 S110=1 S111=30 S45=0 S58=0 S53=3 Q6 &W and found that I was basically almost there. There was a bit of problem with the sun thinking the return code should be a pretty low number, so that had to be shut down (X0) and the echos from the trailblazer confused the silly uucico so that had to go (E0). My modems were defaulting to use long replies and the sample L.sys entries used short, so I made that change (V0). But don't misunderstand, with the info that was sent it was really relatively straightforward (musta been, if *I* could get it to work), and that's basically an indication that the info was GOOD info. I tried to thank everyone who responded with private mail, but some bounced and some I think I lost so here's a big thank you to all the good folks that pitched in. It was muchly appreciated. Oh yeah, almost forgot, to call non-telebit sites I've got S66=1 set as well and it seems to work (locks speed on the interface). -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- | There is nothing in the above message that can't be explained by sunspots. | | execu!dewey Dewey Henize or juniper!dhenize | | Can you say standard disclaimer? I knew you could. Somehow... |