ebh@argon.UUCP (Ed Horch) (11/11/88)
In article <11047@cup.portal.com> ebd@cup.portal.com (Elliot B Dierksen) writes: >I have had good experience so far with a Smart One 2400X that i got for $119!! Same here. The only thing I can't seem to do is get Q1 aka S14 bit 2 to "stick" in nonvolatile RAM. Everything else I set works fine (&D3 is essential when running a bidirectional port), but I can't get it to set the quiet mode bit in the nonvolatile RAM. Is this a (mis)feature designed to make sure the modem never looks "dead" on power-up? BTW, I'm running an AT&T 3B1, v3.5, whose tty driver actually appears to work correctly. I don't know about hardware flow control (I have the HFC driver from the Store but it's not installed), but I won't worry about that until I get a T1000. The signalling lines all seem to be in the right states at the right times, though. -Ed