lenny@icus.islp.ny.us (Lenny Tropiano) (02/05/89)
In article <943@kksys.mn.org> gk@kksys.mn.org (Greg Kemnitz) writes: |>In article <367@twwells.uucp> bill@twwells.UUCP (T. William Wells) writes: |>>I have a Telebit Trailblazer+ and am running Microport V/386 3.0e. I |>>had a request from a friend who uses my system for MNP. Well, I tried |>>setting MNP (S95=2) but found that my modem no longer works after that, |> |>We experienced a similar problem recently. The folks at Telebit gave |>us a "fix" -- feed the command ATJ6S39=3 to your 'blazer... it seems |>to make a world of difference. |> Does anyone have a comprehensive list of ATJ commands for the TB's? What do they actually do? I've done ATJ5, and I get some weird mode with a ">" prompt. In the manual they say this command is reserved for factory use? Is there any good external use, as mentioned above? Why is S39 not even mentioned in the manual? Are there any other undocumented S-registers that might help us TB-hackers... -Lenny -- Lenny Tropiano ICUS Software Systems [w] +1 (516) 582-5525 lenny@icus.islp.ny.us Telex; 154232428 ICUS [h] +1 (516) 968-8576 {talcott,decuac,boulder,hombre,pacbell,sbcs}!icus!lenny attmail!icus!lenny ICUS Software Systems -- PO Box 1; Islip Terrace, NY 11752