KDM101@PSUVM.BITNET (Kevin Maher) (06/20/89)
I have an Everex 1200 baud internal modem model EV-920 that came in a computer sent to us. However, there was no documentation sent with it, and I would like to know how to set the jumpers on the board to specific COM port settings. Here is a quick diagram of where the jumpers are: -------------------------------------------------| | ====== (COM1-4 SELECT) | | | | | | | | || | | line connections | || | | | | | | | == P3 | --------||||||||||||||||||||||||-----------------| card edge Any information on how to get this set correctly would be greatly appreciated. Send directly to me please, KDM101@PSUVM.BITNET or KDM101@PSUVMXA.BITNET Thanks in advance