baw@sharkey.cc.umich.edu (Brian Wolfe) (07/11/89)
Hi there,
I'm trying to get a Trailblazer Plus to work with uucp on a
Vax 11/750 with a DMF32 (also has a DZ11), we have Ultrix 2.2.
Has anyone been able to do this?
The tech-support guys from Telebit tried to figure this one out, but
they ran out of ideas. The modem checks out OK as far as they can tell.
They gave me the settings that they know work with a DMZ32.
I can tip to the modem and then give ATDT commands manually, but
whenever we try uucico it hangs up in some routine called gen_setup and
I have to CTRL-Z to get out of it.
Here's the modem configuration Telebit recommends for a DMZ32
AT &f s07=80 s45=0 s52=2 s53=2 s54=3 s58=3 s64=1 s66=1 s111=30 q6 x0 &w
Here's the acucap entry Telebit faxed to me...
#Telebit Trailblazer
tb9600|trailblazer|Telebit Trailblazer-Plus 9600 baud, Touch Tone :\
:cr:hu:ls:re:ss=\dA\dA\dATZ\r:sr=OK:sd#250000:di=ATDT:dt=\r:\
:dd#50000:fd#80:rs=,:os=CONNECT:ds=\dA\dA\dATZ\r:ab=\dA\dA\dATZ\r:
#
I'd be grateful if anyone could share any insight into this problem
with me... please reply by email and I'll post a summary to the net.
Thanks,
Brian.
--------------------------------------------------------------------
--
Brian Wolfe Internet: baw@terminator.cc.umich.edu
Systems Analyst UUCP: {rutgers,uunet}!sharkey!hfhrv!brian
Henry Ford Hospital Voice: (313)-876-7461
Detroit, MI 48202 FAX: (313)-875-0315