martin@mplvax.EDU (Martin Olivera) (09/28/89)
I use a T2500 in a PC to communicate with a VAX (also with T2500). The PC's side is set in Conventional Command Mode, and I can use it as a terminal at 9600 baud with almost no problems (occasional burps). My problem is that I do not seem to be able to transfer files using the Kermit protocol. I slowed down to 2400 and then 1200 baud without success. Obviously I'm missing something. Need to reset some of the modems' registers?. Kermit parameters? I used a Hayes compatible modem with default Kermit parameters in both, the PC and the VAX, at 2400 baud with success, which makes me suspect that the problem is in the T2500s registers. Any leads to solve this puzzle will be greatly appreciated.