eric@sactoh0.UUCP (Eric J. Nihill) (12/08/89)
Does any one know of a way to force a TB+ to
reset its configuration upon the modem going onhook?
The modem is set up at this time to answer first
at low speed first, then go to PEP. Upon normal completion
of a successful originated or answered call, DTR will turn
off, then go back on, resetting the modem. (S52=2)
The trouble appears when a call comes in that the
modem can not answer. (ie: voice) The modem will step
through all the tones, then go onhook. It will not cause
DTR to cycle off, then on. The modem will remain stuck in
the PEP mode for the next caller. Since the majority of the
callers are 2400 baud, they can not connect. Either uucico
must reset it when it outdials or the process must be
killed, forcing the cycling of DTR.
If the modem could reload upon going onhook, that
could solve my problem. I have found no pointers in the
manuals that came with the TB+ on how to do this.
Any enlightenment or pointers would be appreciated.
In advance, Thank-you;
Eric
(..!ames!pacbell!sactoh0!eric)
--
Gastroenterogist creed: | eric@sactoh0
It will all come out in the end!! | ames!pacbell!sactoh0!eric