dick@slvblc.UUCP (Dick Flanagan) (01/06/90)
I have a Telebit TrailBlazer Plus modem that I use to converse with uunet. My system is an AST 286 running SCO XENIX/286 SYS V 2.3.2. I am able to dial out on the TB+ to uunet just fine; the connection is made, I log on, and all communications are normal. However, when uunet attempts to dial up my system, they consistently get failed logins. Their TB connects (CONNECT FAST) to my TB, but they receive junk from me instead of a login prompt. It would appear the connection between uunet and my modem is good. The problem seems to be that my system cannot accept their login at 19.2 because of a baudrate problem between it and my TB. I have spoken with the good folks at uunet (thanks, James) and they have suggested that I pose my problem to the net. My /etc/ttys entry for the TB line is: 16tty2A My /etc/gettydefs entry for the '6' line speed is: 4 # B2400 HUPCL # B2400 CS8 SANE HUPCL TAB3 ECHOE IXANY #\r\n@!login: # 6 5 # B4800 HUPCL # B4800 CS8 SANE HUPCL TAB3 ECHOE IXANY #\r\n@!login: # 4 6 # B9600 HUPCL # B9600 CS8 SANE HUPCL TAB3 ECHOE IXANY #\r\n@!login: # 5 SCO does not provide a gettydefs entry explicitly for 19.2. Should I be declaring it as 'EXTA' or some such? How can I get getty to accept a login from my TB at 19.2? Once I solve this mystery, one way or another, I will share my findings with the rest of the net. Any and all help will be appreciated. Thanks. Dick -- Dick Flanagan, W6OLD, CFII, CFIG Cherokee 235 N9212W UUCP: ...!uunet!slvblc!dick GEnie: FLANAGAN Internet: slvblc!dick@uunet.UU.NET POB 155, Ben Lomond, CA 95005