carl@legs.UUCP (Carl E. Garringer) (02/09/90)
in article <21@dynasys.UUCP>, jessea@dynasys.UUCP (Jesse W. Asher) says: > 800 number for telebit connections. When I call that number, however, it 900 ? > just says "CONNECT" and doesn't seem to be in PEP mode. The call completes I don't have my doc's here but I think the S50 should be set to 255 to force a PEP connect. The first time I connected to UUNET I connected at 2400 baud and then I figered out how to force the dialer to make a PEP connect. It also changed the wait time from 40 seconds to 60 seconds. > connect to another site after the first time I use it, it doesn't except > any more AT commands. When the dialer gives it an AT&F\r\c and then expects I have the same problem but I have found a workaround. I am using a SCO xenix system, and can use the -h option of the dialer to clear the problem. I think it has something to do with the hardware line (DCD, DTR, etc.). I have noticed that this problem does not occur when using the PEP mode. > a compiled dialer so I had to create an entry in the Dialers file. Here it > is: > Telebit =,-, "" \M\dAT&F\r\c OK\r ATE0Q6F1V1X3S0=1S45=255S50=0S51=254S52=2S53=0S54=3\r\c OK\r ATS55=0S56=017S57=019S58=2S60=0S64=0S65=0S66=1S67=0\r\c OK\r ATS68=255S92=0S95=0S96=1S110=255S111=255S130=2S131=2\r\c OK\r \eATDT\T\r\c CONNECT \r\m\c > In the other dialers, most looked for "00" to tell that it had connected. But > I had to switch it to "CONNECT" in order for it to register. This may be due to the type of return code expected numeric or text. > Just in case something is wrong in this area, I am running uugetty on the line > and here is the gettydefs entry for 19200: > 19200# B19200 OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY PARENB ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS7 CREAD # B19200 OPOST ONLCR TAB3 BRKINT IGNPAR IXON IXANY PARENB ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS7 CREAD #login: #9600 You should try 9600 first, I have not been able to connect at 19200 yet. I am sure that it is my system and not the modem. -- Carl E. Garringer uucp: {ccicpg,felix}!legs!carl c/o AST Research Inc. Dept 660 Fax: (714) 727-9358 P. O. Box 19658 Tel: (714) 727-8631 Irvine, California 92713-9658