chee13h@elroy.uh.edu (A JETSON News User) (03/07/90)
hi, I received a lot of mail about hooking up telebit modems on SUN4.0.3. if anybody is interested, send me mail and i will be too glad to forward the stuff to you. NOW, I tried the stuff the people form telebit sent me and I get the following messages. for the lif of me I can't figure out what to try next. Can someone out there help out? I set up th modem to the following settings: AT&F s45=0 s51=5 s52=2 s53=3 s54=3 s58=0 s66=1 s68=3 s110=1 s111=30 q6 &W <CR> I can dial out using tip tb19200 and also get garbage, when i do tip tb9600. This was to be expected I think, since the modem is set up for 19200. My L.sys entries are the following : hostname Any cua1 19200 cua1 "" ATX0\r OK ATDtele-no.\r CONNECT ""\ ""-\r-login:-\r-login:-\r-login: \r login: sysname ssword: xxxxxx L-devices : ACUHAYES cua1 cua1 19200 DIR cua1 0 19200 NOw, I try /usr/lib/uucp/uucico -r1 -x10 -suunet ps: hostname was uunet on the L.sys entry OUTPUT: getto called call:no cua1 for sys uunet login called wanted "" got that send ATX0\r RETURN wanted OK ATX0\0150\015\012 got ? exit code 0 STST.uunet had LOGIN FAILED as the message. What's the mistake I am making??? thanx ashok chee13h@jane.uh.edu