[comp.dcom.modems] PC Com1 at 19200 w/ MS-DOS, Windows 3.0

indra@ashirvad.amd.com (Indra Singhal) (08/01/90)

I would like to drive the serial port on my AST Premium/286 at 19200 but
the MS/DOS mode command only allows upto 9600. I have successfully
communicated at 19200 using Qmodem but, its VT100 emulation is the pits.

Is there some way I can have the serial port run at 19200? Terminal under
Windows 3 has a 19200 option but it seems to revert back to 9600.

Any windows based communication packages out there that support 19.2Kb?

Thanks.

--
iNDRA | indra@amd.com (Indra Singhal) (408) 749-5445
      | {ames decwrl apple pyramid sun uunet}!amdcad!indra
      | MS 167; Box 3453; 901, Thompson Pl., Sunnyvale, CA 94088

altman@sbpmt.cs.sunysb.edu (Jeff Altman) (08/02/90)

Crosstalk for Windows 1.1 supports 19200 baud.  However,
on a 286 machine you are going to lose characters during the
screen emulation translation from Escape codes to screen 
text.

- Jeff (jaltman@ccmail.sunysb.edu)