pj@pnet51.orb.mn.org (Paul Jacoby) (09/04/90)
I am running a Unisys U6000/50 (a Convergent machine with iAPX386 V.3.2). We have two Telebit T2500's configured with uugetty. A small annoyance has popped up when using cu to dial out when one of the modems has recently received an inbound call. Watching the front-panel lights on the T2500, we notice that DTR gets left high after the inbound call disconnects. Hitting the modem with cu will result in a pause and eventually an "Unable to connect to device" type message. However, a SECOND cu at this point will work! We note that when the first cu times out, DTR will drop, which then allows cu #2 to make a connection. I don't want to unecessarily post all of my settings, gettydefs, and inittab entries. Can anyone give me some ideas without this information? If need be, I can put up the full configuration. .-----------------------------------------------------------------------------. | UUCP: {rosevax, crash, orator}!orbit!pnet51!pj | Working with idiots keeps | | ARPA: crash!orbit!pnet51!pj@nosc.mil | my life interesting... | | INET: pj@pnet51.cts.com | | `-----------------------------------------------------------------------------'