brian@fog.ann-arbor.mi.us (Brian S. Schang) (09/26/90)
I am having minor problems getting my Telebit T2500 to work properly with uucp. When I dial out and get a busy signal, I get the following in my LOGFILE: uucp ***** (9/25-21:38-676) FAILED (BUSY) uucp ***** (9/25-21:38-676) LOST LINE (LOGIN) uucp ***** (9/25-21:38-676) HSM did not respond to ATZ (modem) uucp ***** (9/25-21:38-676) FAILED (call to umich ) When I use my Hayes 2400 I get only the following: uucp ***** (9/25-21:38-676) FAILED (BUSY) uucp ***** (9/25-21:38-676) FAILED (call to umich ) I'm not sure why. It's a minor problem, and works OK the way it is, but my curiousity is intrigued. I don't understand why I get the extra two entries. My T2500 settings are as follows: E1 F1 M0 Q4 T V1 W0 X14 Y0 &P0 &T4 Version GE6.01-T2500 S00:000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=040 S08=002 S09=006 S10=007 S11=070 S12=050 S18=000 S25=005 S26=000 S38=000 S41=000 S45=000 S47=004 S48=000 S49=000 S50=000 S51:005 S52:002 S54:003 S55=000 S56=017 S57=019 S58:000 S59=000 S61=150 S62=003 S63=001 S64=000 S65=000 S66:001 S67=000 S68=255 S69=000 S90=000 S91=000 S92=000 S93=008 S94=001 S95:002 S96:000 S97=000 S98=003 S100=000 S101=000 S102=000 S104=000 S105=001 S106=000 S107=020 S110:000 S111:030 S112=001 S121=000 S130=002 S131:003 S150=000 S151=004 S152=001 S153=001 S154=000 S155=000 S160=010 S161=020 S162=002 S163=003 S164=007 S255=000 Can anyone see any setting errors in regards to the aforementioned problem or any setting errors in general? I'm using A/UX 1.1 and my understanding is that I cannot use flow control do to lack of appropriate lines. I dial into a Trailblazer and use PEP. Any insight would be appreciated. Thanks! -- Brian S. Schang N8FOG brian@fog.ann-arbor.mi.us 46131 Academy Drive schang@caen.engin.umich.edu Plymouth, MI 48170-3519