peter@nanometrics.portal.UUCP (Peter Thompson) (09/28/90)
I have a Telebit T2500 hooked up to my Apollo DN3500.
I have problems using the T2500 with uucp, much less
anything else. The problem is that I get this:
# ./uucico -r1 -x9 -sportal
...
expect: (OK^M)
^M^JOK^Mgot it
sendthem (ATS50=255S7=60^M^M)
expect: (OK^M)
^J^M^JOK^Mgot it
sendthem (ATDT9,9731134^M^M)
expect: (CONNECT)
^J^M^JCONNECTgot it
sendthem (<NO CR>^M)
getto ret 6
expect: (ogin:)
FAST^M^J^Mportal (lark:/dev/tty00) login:got it
(login and password deleted :-) )
final protocol selection is DEFAULT
imsg >FrOboZz;^M^M^J^PShere=portal^@Login Successful: System=portal
imsg >^PSnanometrics -x9^@msg-Snanometrics -x9
imsg >^PROK^@msg-ROK
Rmtname portal, Role MASTER, Ifn - 6, Loginuser - root
rmesg - 'P' imsg >^PPgetxf^@got Pgetxf
wmesg 'U'g
send CNTL, INITA, val 3
bad header checksum
recv CNTL, INITA, val 3
.
.
.
And the bad header checksum causes *LOTS* of errors, including
an assert error from uucico. Sigh. Here are the switch settings:
ATN?
E1 F0 M0 Q4 T V1 W0 X1 Y0 &P0 &T4 Version GF7.00-T2500SA
S00:000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07:060 S08=002 S09=006
S10=007 S11=070 S12=050 S18=000 S25=005 S26=000 S38=000
S41=000 S45=000 S47=004 S48=000 S49=000
S50=000 S51:254 S52=000 S54:003 S55:003 S56=017 S57=019 S58:000 S59=000
S61=150 S62=003 S63=001 S64:001 S65=000 S66=000 S67=000 S68:000 S69=000
S90=000 S91=000 S92=000 S93=008 S94=001 S95=000 S96=001 S97=000 S98=003
S100=000 S101=000 S102=000 S104=000 S105=001 S106=000 S107=020
S110=255 S111:000 S112=001
S121=000 S130=002 S131=002
S150=000 S151=004 S152=001 S153=001 S154=000 S155=000 S157=000 S158=000
S160=010 S161=020 S162=002 S163=003 S164=007 S169=000 S255=000
OK
Any hints as to what is wrong? Please no flames, as my asbestos suit
is at the cleaner.
Thanks in advance...Peter Thompson
--
Peter Thompson Phone: (408) 746-1638
Nanometrics, Inc. UUCP: ..!portal!nanometrics!peter
690 E. Arques Ave or: ..!pyramid!nanoat!peter
Sunnyvale, CA 94086 Fax: (408) 720-0196