palkovic@tomato.fnal.gov (John Palkovic) (10/10/90)
Platform: Sun4/260, SunOS 4.1.
I am having problems with uucp through a Microcom AX/2400c modem. I
can connect and login OK, but I am seeing a lot of "pkcget: Alarm"
messages at level 5 in uucico. Here is the output of a level 9 uucico:
wmesg 'H'
send DATA, loc 1, rem 0
rmesg - 'H' recv CNTL, RR, val 1
state - [O.K.] (010)
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
bad header checksum
recv CNTL, RR, val 1
send CNTL, RJ, val 0
state - [O.K.] (010)
recv CNTL, CLOSE, val 0
state - [Link down]&[RCLOSE?] (06000)
got FAIL
cntrl - -1
omsg "OOOOOO"
send OO 0,omsg "OOOOOO"
imsg >^P^I"*^H^I^POOOOOO^@exit code -1
Conversation Complete: Status FAILED
======================
When the same computer calls me, there are no problems. I would be
interested in hearing from anyone who is using this modem for UUCP and
what initialization strings and switch settings they are using. The
answering modem is a Telebit T2500, I have MNP turned OFF (AT\N0) in
my modem.
--
John Palkovic {att,uunet}!tellab5!linac!palkovic
palkovic@linac.fnal.gov, {att,uunet}!linac.fnal.gov!palkovic works too.
Home: linac!jpmac!johnny