Lockie_Martin@f170.n771.z3.fidonet.org (Lockie Martin) (01/09/91)
FSC-Control: EID:1a3b 1629b1cf ******* Help Help Help ******** I have just purchased a Super 5 2400 bps modem and I am having great difficulty making it work. After setting the modem to factory defaults. AT&F The only way I can make it dial is by setting ATX1 the default is ATX4 but in this state the modem will not dial at all. With ATX1 I can dial OK but fail to make a connection. I feel there is something I am missing here ******* Help Help Help ******** re LM --- via Silver Xpress V2.27 [NR] * Origin: Xpress'n interest in Genealogy: GenBOARD 64-4-4990-490 (3:771/160) SEEN-BY: 771/110 160 170 180 772/20 FSC-Control: PATH: 771/160 170
Barry_Blackford@f170.n771.z3.fidonet.org (Barry Blackford) (01/28/91)
FSC-Control: EID:8bb3 163d1320 FSC-Control: PID: RA 0.04 1114 LM> I have just purchased a Super 5 2400 bps modem and I am LM> having great LM> difficulty making it work. After setting the modem to LM> factory defaults. LM> AT&F I may be able to shed some light on this, i have a V32 9600 super5 modem and if the commands are the same you will need to change a couple of things from defaults. Sorry i cant find the book so i'm working from memory. 1. the modem defaults to "BELL" you'll need to change it to "CCITT" 2. the modem defaults to "RJ11" or 10 or similar, you'll need to go to "RJ12" , i think thats right. It's a start anyway, Good luck Baz --- * Origin: Waikato Amiga CBCS Hamilton *NZ* 64-71-466-918 (3:774/605) SEEN-BY: 770/101 771/110 170 180 772/20 140 774/501 605 FSC-Control: PATH: 774/501 772/20 771/170