cgantz@isis.cs.du.edu (Christopher A. Gantz) (03/06/91)
Hello, I've been having the following problem with uucp and my Sun3 with a MultiTech Modem (model 224E) and I was wondering if someone in this group might be able to help me figure out what I am doing wrong!!! I've followed the sun manual directions and I've even read the O'Reilly and Assoc. book on managing uucp but I still can't seem to find the problem. So I thought that maybe a follow netter had licked this problem. Please respond back to me through e-mail so as to not clutter the usenet... Thanks in advance and Below is a cat of my error script: % uucico -r1 -x9 -snyx finds called getto called call: no. du4824 for sys nyx Dial 871-4824 Using dialer type ACUHAYES dialing Hayes 0\015ACU write ok 9R\015Line open failed, UNKNOWN DIALER ERROR dcr returned as -1 Dial 871-4824 Using dialer type ACUHAYES dialing Hayes 0\015ACU write ok 9R\015Line open failed, UNKNOWN DIALER ERROR dcr returned as -1 exit code 0 % -- Chris Gantz Univ of Denver Internet: cgantz@diana.cair.du.edu Dept. of Math & Comp. Sci. cgantz@nyx.cs.du.edu Denver, CO 80208