stigall@silver.ucs.indiana.edu (john stigall) (03/28/91)
I'm having a problem with Mitsuba 2400 baud modems. It appears that the
autobauding via the AT command is not real reliable, as some terminals
I have tried when set to 2400 baud will cause the HS (high speed) light
to go out and the modem will not establish connection at 2400. Identically
set up terminals will work consistently. The terminals I am using are DEC
VT-220 and VT240, set to VT100 mode, 8bit, no parity and 1 Stop bit. I
have tried 7-E-1 also. There are no phone numbers or addresses supplied
with the Mitsuba modems, only the marking "made in Korea". Somebody said
if they don't work so well, maybe that's why they're so cheap. Geeezzz.
--
John Stigall - Indiana University Computing Services Network
750 N. State Rd. 46 Bypass, Bloomington, Indiana 47405
(812)855-9255 stigall@ucs.indiana.edukreed@telesys.cts.com (Kevin W. Reed) (03/28/91)
stigall@silver.ucs.indiana.edu (john stigall) writes: >I'm having a problem with Mitsuba 2400 baud modems. It appears that the >autobauding via the AT command is not real reliable, as some terminals >I have tried when set to 2400 baud will cause the HS (high speed) light >to go out and the modem will not establish connection at 2400. Identically >set up terminals will work consistently. The terminals I am using are DEC >VT-220 and VT240, set to VT100 mode, 8bit, no parity and 1 Stop bit. I >have tried 7-E-1 also. There are no phone numbers or addresses supplied >with the Mitsuba modems, only the marking "made in Korea". Somebody said >if they don't work so well, maybe that's why they're so cheap. Geeezzz. >-- Mitsuba Corp. 1 800 648 7822 1 714 392 2000 1 714 599 8625 (Technical Dept) Mitsuba modems are known to have this problem. It is not your terminals at fault. Some of their modems, just don't connect reliably. When you get one that does, they work great. Suggest you send your modem in for exchange. -- Kevin W. Reed TeleSys Development Systems San Diego, CA USA {nosc,ucsd}!crash!telesys!kreed kreed@telesys.cts.com TeleSys-II BBS & Development System Primary Number +1 619 483 3890