albers@ka3ovk (Jon Albers) (04/04/91)
We just got 2 Netblazers (2 serial, 2 ethernet cards, 1 T2500) to evaluate here. We have 2 networks to link via the T2500 and phone line: The ssi network consists of: 100.30.0.1 ssi <-- The netblazer at ssi. 100.30.0.5 irs5 <-- Unix mini 100.30.0.6 irs6 <-- Unix mini 100.30.0.8 irs8 <-- Unix mini 100.30.0.10 ka3ovk <-- SCO Unix micro 100.30.0.11 w3wox <-- SCO Unix micro The bxr network consists of: 89.0.0.1 sys95 <-- Unix mini 89.0.0.2 sys85 <-- Unix mini 89.0.0.3 bxr <-- The netblazer at bxr. Now, the netblazers at both networks are set up and working as terminal servers. I can log in and telnet from the netblazer to any other host on the LOCAL network, and any other host on the LOCAL network can telnet to the LOCAL netblazer. Convincing the netblazer to connect the 2 networks together has been difficlut. I think we have followed the directions in the manual OK, but any attempt to cannect to a host on the 89.x.x.x net from the ssi netblazer still causes it to look out the LOCAL ethernet and vice versa. When I log into the netblazer, and do a 'session dial bxr', it complains that 'no dialout lines are available', although the dialup is defined properly as far as Ican tell. Has anyone set up a netblazer yet!?! I have several calls into our local Telebit office, but I have not gotten a call back in 2 days of trying.. Jon -- | Jon Albers, IRS, Information Systems Management, Support and Installation. | | Office Symbols: ISM:S:S:SI voice: (202/FTS)535-3729 Packet: KA3OVK@N4QQ | | UUCP:(media|teemc|tcsc3b2|ki4pv)!ka3ovk!albers ARPA: JALBERS@SIMTEL20 |