phil@hansen.ncd.com (Phil Graham) (05/11/91)
A friend just gave me a 1200 baud modem that I am going to use as a part time remote link... The problem is that he did not have the manual... I am looking for the following information! - Pinout for DB-25 - Dip switch settings Thanks in advance! Phil EMAIL: phil@ncd.com
peter@ficc.ferranti.com (Peter da Silva) (05/13/91)
In article <5479@lupine.NCD.COM> phil@hansen.ncd.com (Phil Graham) writes: > - Pinout for DB-25 Same as any other piece of DCE. Modems are about the only piece of hardware with an RS232 port that's actually standardised! Any modem docs will give you this data. (DCE -- Data Communication Equipment) -- Peter da Silva; Ferranti International Controls Corporation; +1 713 274 5180; Sugar Land, TX 77487-5012; `-_-' "Have you hugged your wolf, today?"
phil@hansen.ncd.com (Phil Graham) (05/13/91)
I forgot to mention... The modem is a HAYES SMARTMODEM 1200... In article <5479@lupine.NCD.COM>, phil@hansen.ncd.com (Phil Graham) writes: |> A friend just gave me a 1200 baud modem that I am going to use as a part time remote link... |> |> The problem is that he did not have the manual... |> |> |> I am looking for the following information! |> |> |> - Pinout for DB-25 |> |> - Dip switch settings |> |> |> Thanks in advance! |> |> |> Phil |> |> EMAIL: phil@ncd.com |> |>