dan@dyndata.uucp (Dan Everhart) (05/22/91)
A few times in the last few months since I've gotten this T1600 I've
found it locked up. All the front panel lamps are lit, except for
CTS, SD, and RD. Pressing the T/D button has no effect; the modem
does not reset. Power cycling fixes the problem.
Anybody else seen/solved this? I'm running the modem in UUCP spoofing
mode, with the computer interface locked at 19200 and hardware flow
control enabled. OS is Xenix 2.3.2 with HDB uucp.
--
Dan Everhart Dynamic Data & Electronics
dan@dyndata.uucp 7107 179th St SW
dan@dyndata.celestial.com Edmonds, WA 98026, USA
{camco,eskimo,fluke}!dyndata!dansysop@mixcom.COM (System Operator) (05/25/91)
dan@dyndata.uucp (Dan Everhart) writes: >A few times in the last few months since I've gotten this T1600 I've >found it locked up. All the front panel lamps are lit, except for >CTS, SD, and RD. Pressing the T/D button has no effect; the modem >does not reset. Power cycling fixes the problem. >Anybody else seen/solved this? I'm running the modem in UUCP spoofing >mode, with the computer interface locked at 19200 and hardware flow >control enabled. OS is Xenix 2.3.2 with HDB uucp. Yes. My T1600 locks when talking to a USR Dual Std. with a V.32/V.42bis link. Both modems will talk to other V.32 and V.42bis modems with no problems. They just won't talk to each other without eventually locking. Each has the latest firmware. Dean Roth