[comp.terminals] Need termcap for Ergo-4000

bdale@winfree.UUCP (Bdale Garbee) (01/16/87)

I need a termcap entry for 4.2bsd for an Ergo-4000 terminal from MicroTerm.
If anyone can help out, I'd really appreciate it.
-- 


Bdale Garbee, N3EUA		phone: 303/593-9828 h, 303/590-2868 w
uucp: {bellcore,crash,hp-lsd,hpcsma,pitt,usafa,vixie}!winfree!bdale
fido: sysop of 128/19		packet: n3eua @ wb0blv, Colorado Springs

paul@devon.UUCP (01/26/87)

In article <204@winfree.UUCP>, bdale@winfree.UUCP (Bdale Garbee) writes:
> I need a termcap entry for 4.2bsd for an Ergo-4000 terminal from MicroTerm.
> If anyone can help out, I'd really appreciate it.

The ERGO-4000 has two modes VT52 and ANSI.  In ansi mode, it emulates
most (all?) vt-100 commands.  The only difference that I know of is
that the ergo-4000 has a 66 line mode.  Try something like:

e4|ergo4000:li#66:tc=vt100

-- 
Paul Sutcliffe, Jr.	 UUCP: {seismo,ihnp4,allegra,rutgers}!cbmvax!devon!paul
Devon Computer Services  COMPUSERVE: 76176,502
Allentown, Penna.	 "I love work ..."
+1 215 398 3776 	 "... I could sit and watch people do it all day!"