jag@entire.xerox.com (John A. Gallant) (12/19/87)
Does anyone out there have recomentations for ANSI format keyboards, for the various PC clones out there. We are running Interactive Systems, (ISC), port of Unix System V.3 on PC clones with Intels 80386 mother board. Much to my dismay, (and hand cramps :-), the XT keyboard has the most important Unix keys in the WRONG!!! place. My history is with using VT*** look alikes attached to systems, if I had a dime for every time I have typed "`" instead of ESC ... I have found two vendors, keytronic and OAK, that have a something close to my ideal keyboard. Keytronic is currently in the lead, with minuses on the location of the DEL, (my INTR) and the "~" key, (mailx and cu). OAK at least has the ESC and "~" correct. If any one has ideas or help for a frustrated fellow hacker, please let me know. Right now e-mail is the prefered method, my free time is limited and I don't get much time to read all groups I would like. Thank you. -- John A. Gallant UUCP: {..}rutgers!rochester!rocksanne!entire!jag Engineer - Firmware Group Entire Inc./Xerox It is better to remain silent and be thought a fool, than to speak and remove all doubt.