svd@bigboy.wyse.com (Steve Van Domelen) (07/22/88)
I have received a number of requests for the terminfo entries for the Wyse terminals and thought I might as well post them for anyone else who might be interested. Again, if you have any problems, questions, or suggestions for improvements - please let me know. ------------------------------------------------------------ Steve Van Domelen | uucp: svd@bigboy.wyse.com Wyse Technology | att: (408) 433 - 5675 3571 N 1st St | San Jose, CA 95134 | ====================== C U T H E R E ========================== # # Wyse Technology # 3571 North First Street # San Jose, CA 95134 # wy30|wyse30|Wyse 30, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, am, bel=^G, blink=\EG2, bw, cbt=\EI, civis=\E`0, clear=\E*$<80>, cnorm=\E`1, cols#80, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<10>, dim=\EGp, dl1=\ER$<1>, dsl=\EF^M, ed=\Ey$<80>, el=\Et, fsl=^M, home=^^, hs, ht=^I$<1>, hts=\E1, .ich1=\EQ, il1=\EE$<2>, ind=^J$<2>, invis=\EG1, ip=$<2>, is2=\E'\E(\E\^3\E`9^N^T, it#8, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, kent=\E7, ked=\EY, kel=\ET, kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kHOM=\E{, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, lh#1, lines#24, ll=^^^K, lw#8, mc0=\EP, mc4=^T, mc5=^R, mir, nel=^M^J, nlab#8, pfx=\Ez%p1%'?'%+%c%p2%s\177, pln=\Ez%p1%'/'%+%c%p2%s^M, prot=\EG0\E), rev=\EG4, ri=\Ej$<3>, rmacs=\EG0\EH^C, rmir=\Er, rmln=\EA11, rmso=\EG0, rmul=\EG0, sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p5%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH^B%e\EH^C%;, sgr0=\EG0\E(\EH^C, smacs=\EG0\EH^B, smir=\Eq, smln=\EA10, smso=\EG4, smul=\EG8, tbc=\E0, tsl=\EF, wsl#45, xmc#1, xon, # The manditorary pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy30-vb|wyse30-vb|wyse 30 Visable bell, flash=\E`8$<100/>\E`9, use=wy30, # # wy50|wyse50|Wyse 50, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, am, bel=^G, blink=\EG2, bw, cbt=\EI, civis=\E`0, clear=\E*$<20>, cnorm=\E`1, cols#80, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<1>, dim=\EGp, dl1=\ER, dsl=\EF^M, ed=\Ey$<20>, el=\Et, fsl=^M, home=^^, hs, ht=^I, hts=\E1, .ich1=\EQ, il1=\EE, ind=^J$<2>, invis=\EG1, ip=$<1>, is1=\E`:\E`9$<30>, is2=^N^T\E'\E(, it#8, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M, kf11=^AJ^M, kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M, kf16=^AO^M, kHOM=\E{, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, lh#1, lines#24, ll=^^^K, lw#8, mc0=\EP, mc4=^T, mc5=^R, mir, nel=^M^J, nlab#8, pfx=\Ez%p1%'?'%+%c%p2%s\177, pln=\Ez%p1%'/'%+%c%p2%s^M, prot=\EG0\E), rev=\EG4, ri=\Ej, rmacs=\EG0\EH^C, rmir=\Er, rmln=\EA11, rmso=\EG0, rmul=\EG0, sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH^B%e\EH^C%;, sgr0=\EG0\E(\EH^C, smacs=\EG0\EH^B, smir=\Eq, smln=\EA10, smso=\EGt, smul=\EG8, tbc=\E0, tsl=\EF, wsl#45, xmc#1, xon, # The manditorary pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy50-vb|wyse50-vb|wyse 50 Visable bell, flash=\E`8$<100/>\E`9, use=wy50, wy50-w|wyse50-w|wyse 50 132-column, cup=\Ea%i%p1%dR%p2%dC, cols#132, dch1=\EW$<2>, is1=\E`;\E`9$<30>, lw#7, nlab#16, wsl#97, use=wy50, wy50-wvb|wyse50-wvb|wyse 50 132-column Visable bell, flash=\E`8$<100/>\E`9, use=wy50-w, # # The Wyse 60 is like the Wyse 50 but with more padding. # The reset strings are slow and the pad times very depending # on other parameters such as font loading. I have tried # to follow the following outline: # rs1 -> set personality # rs2 -> set number of columns # rs3 -> set number of lines # is1 -> select the proper font # is2 -> do the initialization # is3 -> set up display memory (2 pages) # # The Wyse 60's that have vt100 emulation are slower than the # older Wyse 60's. This change happened mid-1987. # The capabilities effected are (dch1) (dl1) (il1) (ind) (ri) # # It may be useful to assign two function keys with the # values \E=(\s look at old data in page 1 # \E=W, look at bottem of page 1 ################################################################### ### Note: ### ### The Wyse 60 runs faster when the XON/XOFF ### ### handshake is turned off. ### ################################################################### wy60|wyse60|Wyse 60, .acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, am, bel=^G, blink=\EG2, bw, cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cols#80, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\EF^M, ed=\Ey$<100>, el=\Et, fsl=^M, home=^^, hs, ht=^I$<1>, hts=\E1, il1=\EE$<4>, ind=^J$<5>, invis=\EG1, ip=$<3>, is1=\EcB0\EcC1, is2=\Ed$\EcD\E'\Er\EH^C\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1^N^T, is3=\EwJ\Ew1$<150>, it#8, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M, kf11=^AJ^M, kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M, kf16=^AO^M, kHOM=\E{, khome=^^, kich1=\EQ, kil1=\EE, km, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, lh#1, ll=^^^K, lines#24, lw#8, mc0=\EP, mc4=^T, mc5=^R, mir, msgr, nel=^M^J$<3>, nlab#8, pfloc=\EZ2%p1%'?'%+%c%p2%s\177, pfx=\EZ1%p1%'?'%+%c%p2%s\177, pln=\Ez%p1%'/'%+%c%p2%s^M, prot=\E), rev=\EG4, ri=\Ej$<7>, rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH^C\EG0\EcD, smacs=\EcE, smam=\Ed/, smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, tsl=\EF, wsl#45, .xon, # wy60-w|wyse60-w|wyse 60 132-column, cols#132, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, lw#7, nlab#16, rs2=\EeF$<150>\E`;$<150>, wsl#97, use=wy60, # wy60-25|wyse60-25|wyse 60 80-column 25-lines, lines#25, rs3=\EwG\Ee)$<200>, nlab@, lh@, lw@, pln@, use=wy60, wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, lines#25, rs3=\EwG\Ee)$<200>, nlab@, lh@, lw@, pln@, use=wy60-w, # wy60-42|wyse60-42|wyse 60 80-column 42-lines, clear=\E*$<260>, ed=\Ey$<260>, cup=\E=%p1%' '%+%c%p2%' '%+%c$<2>, dch1=\EW$<16>, dl1=\ER$<11>, ip=$<5>, ri=\Ej$<10>, ind=^J$<9>, il1=\EE$<11>, lines#42, nel=^M^J$<6>, rs3=\Ee*$<150>, is1=\EcB2\EcC3, use=wy60, wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, cols#132, cup=\Ea%i%p1%dR%p2%dC$<2>, clear=\E*$<260>, ed=\Ey$<260>, dch1=\EW$<19>, ip=$<6>, lw#7, home=^^$<2>, nel=^M^J$<11>, nlab#16, rs2=\EeF$<150>\E`;$<150>, wsl#97, use=wy60-42, # wy60-43|wyse60-43|wyse 60 80-column 43-lines, lines#43, rs3=\Ee+$<150>, nlab@, lh@, lw@, pln@, use=wy60-42, wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, lines#43, rs3=\Ee+$<150>, nlab@, lh@, lw@, pln@, use=wy60-42-w, # wy60-vb|wyse60-vb|Wyse 60 Visable bell, flash=\E`8$<100/>\E`9, use=wy60, wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column Visable bell, flash=\E`8$<100/>\E`9, use=wy60-w, # ###################################################################### # # The Wyse-99GT looks at lot like the Wyse 60 except that it # does not have the 42/43 line mode. In the Wyse-60 the "lines" # setup parameter controls the number of lines on the screen. # For the Wyse 99GT the "lines" setup parameter controls the # number of lines in a page. The screen can display 25 lines max. # The Wyse-99GT also has personalities for the VT220 and # Tektronix 4014. But this has no bearing on the native mode. # wy99gt|wyse99gt|Wyse 99gt, clear=\E*$<130>, dch1=\EW$<5>, dl1=\ER$<3>, ed=\Ey$<130>, ht=^I, il1=\EE$<3>, ind=^J$<4>, ip=$<2>, is3=\Ew0, nel@, ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1, use=wy60, # wy99gt-w|wyse99gt-w|wyse 99gt 132-column, clear=\E*$<160>, cols#132, cup=\Ea%i%p1%dR%p2%dC$<2>, dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, lw#7, nlab#16, rs2=\E`;$<150>, wsl#97, use=wy99gt, # wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, lines#25, rs2=\E`:$<150>, rs3=\EwG\Ee)$<200>, nlab@, lh@, lw@, pln@, use=wy99gt, # wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, lines#25, rs2=\E`;$<150>, nlab@, lh@, lw@, pln@, use=wy99gt-w, # wy99gt-vb|wyse99gt-vb|Wyse 99gt Visable bell, flash=\E`8$<100/>\E`9, use=wy99gt, # wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column Visable bell, flash=\E`8$<100/>\E`9, use=wy99gt-w, # # The Wyse 75 is a vt100 lookalike without advanced video. # # The Wyse 75 can support one attribute (e.g. Dim, Inverse, # Underline) without magic cookies. The following description # uses this capability, but when more than one attribute is # put on the screen at once, all attributes will be changed # to be the same as the last attribute given. # The Wyse 75 can support more attributes when used with magic # cookies. The wy75-mc terminal description uses magic cookies # to correctly handle multiple attributes on a screen. # wy75|wyse75|wyse 75, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, am, bel=^G, .blink=\E[5m, cbt=\E[1Z, civis=\E[?25l, clear=\E[H\E[J$<30>, cnorm=\E[?25h, cols#80, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m, dl1=\E[M, dl=\E[%p1%dM$<1*>, dsl=\E[>\,^A^A\E[>-^A^A, ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0, fsl=^A, home=\E[H, hpa=\E[%i%p1%dG, hs, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>, .ich1=\E[@, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=^J$<2>, .invis=\E[8m, ip=$<1>, is2=\E>\E[?7;?8h\E[4;?1l^O\E)0, it#8, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM, kf1=\E[?5i, kf2=\E[?3i, kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf21=\E[35~, kfnd=\E[1~, khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, lines#24, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, mir, msgr, pb#1201, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, rs1=\E7\E[1;24r\E8, rs2=\E[0m\E[35;?7;?8h\E[30;?1l$<20>, rs3=\E[?3l$<80>, sc=\E7, sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[0m%;%?%p9%t^N%e^O%;, sgr0=\E[0m^O, smacs=\E[0m^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, tbc=\E[3g, tsl=\E[>\,^A, wsl#78, xenl, xon, # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # wy75-mc|wyse75-mc|wyse 75 with magic cookies, msgr@, xmc#1, blink=\E[2p, dim=\E[1p, invis=\E[4p, rev=\E[16p, rmacs=\E[0p^O, rmso=\E[0p, rmul=\E[0p, rs2=\E[0p\E[35;?7;?8h\E[30;?1l$<20>, sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t^N%e^O%;, sgr0=\E[0p^O, smacs=\E[0p^N, smso=\E[17p, smul=\E[8p, use=wy75, wy75-vb|wyse75-vb|wyse 75 with visible bell, pb@, flash=\E[30h\E\,\E[30l$<250>, use=wy75, wy75-w|wyse75-w|wyse 75 in 132 column mode, cols#132, wsl#130, rs3=\E[?3h$<80>, use=wy75, wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, pb@, flash=\E[30h\E\,\E[30l$<250>, use=wy75-w, # # Wyse 85 emulating a vt220 7 bit mode. # 24 line screen with status line. # # The vt220 mode permits more function keys but it wipes out # the escape key. I strongly reccomend that f11 be set to # escape (esc). # The terminal may have to be set for 8 data bits and 2 stop # bits for the arrow keys to work. # The Wyse 85 runs faster with XON/XOFF enabled. Also the # (dch) and (ich) work best when XON/XOFF is set. (ich) and # (dch) leave trash on the screen when used without XON/XOFF. # wy85|wyse85|wyse 85, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, am, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<110>, cnorm=\E[?25h, cols#80, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cub=\E[%p1%dD, cud1=\E[B, cud=\E[%p1%dB, cuf1=\E[C, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH$<1>, cuu1=\E[A, cuu=\E[%p1%dA, dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>, el1=\E[1K, el=\E[K, enacs=\E)0, fsl=\E[1;24r\E8, home=\E[H, hs, ht=^I$<1>, hts=\EH, ich=\E[%p1%d@$<4*>, .ich1=\E[@, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E7\E[?6l\E8\E[?5W, is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12;36h\E[?7;8;25h$<16>, is3=\E>^O\E)0\Em, it#8, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf1=\EOP, kf20=\E[34~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, lines#24, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, mir, msgr, rc=\E8, rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E<\E[3;13l\E[!p\E7\E[1;24r\E8\E(B, rs2=\E[35h\E[?3l$<70>, sc=\E7, sgr0=\E[m^O, sgr=\E[0%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%p1%|%t;1%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E=, smso=\E[1m, smul=\E[4m, tbc=\E[3g, tsl=\E[40h\E7\E[25;%i%p1%dH, wsl#80, xenl, xon, # # Wyse 85 with visual bell. wy85-vb|wyse85-vb|wyse 85 with visible bell, flash=\E[30h\E\,\E[30l$<300>, use=wy85, # # Wyse 85 in 132-column mode. wy85-w|wyse85-w|wyse 85 in 132-column mode, cols#132, wsl#132, rs2=\E[35h\E[?3h$<70>, use=wy85, # # Wyse 85 in 132-column mode with visual bell. wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, flash=\E[30h\E\,\E[30l$<300>, use=wy85-w, # # This terminfo description is untested. # wy100|100|wyse 100, bel=^G, clear=\E;, cols#80, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW, dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, hs, il1=\EE, ind=^J, is2=\EA30, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, khome=\E{, lines#24, mir, rmir=\Er, rmso=\EG0, rmul=\EG0, smir=\Eq, smso=\EG4, smul=\EG8, tsl=\EF, xmc#1,