jbw@bucsb.UUCP (jbw) (03/22/89)
Dear Terminal Gurus,
How do I set User Defined Keys on a VT220? I've read the VT220
Programmer Pocket Guide, and it's not quite obvious. Unfortunately, I
don't have access to a VT220 Programmer's Reference Manual. The
format given is this:
DCS Pc ; Pl | ky1/st1;ky2/st2;...kyn/stn ST
^^^^^^^^^^^^^^^^^^^^^^^^^^
DCS can be done by ESC P
ST can be done by ESC \
Pc is 0, 1, or empty.
Pl is 0, 1, or empty.
The part emphasized is the part I don't understand. What is the
format that goes in there?
Thanks a lot for any help you can give me!
--
Joe Wells
INTERNET: jbw%bucsf.bu.edu@bu-it.bu.edu IP: [128.197.10.201]
UUCP: ...!harvard!bu-cs!bucsf!jbw