mab@ulysses.att.com (Muhammad Basit[rs]) (08/14/90)
I have an HP terminal that I use to connect to Ultrix and VMS systems (thru modem). On Ultrix i have no problem but on VMS I can not use the screen editor EDT probably because VMS does not support an HP terminal. I tried many options in 'SET TERM' command, but found no clue. Is there a terminfo equivalent on VMS, or is there some vt100 (or other dec) emulator programs for ultrix easily available? that I can run before logging into VMS. Any pointers will be greatly appreciated. Thanks Muhammad Basit
lrb@rrivax.rri.uwo.ca (Lance R. Bailey) (08/14/90)
In article <13585@ulysses.att.com>, mab@ulysses.att.com (Muhammad Basit[rs]) writes... > >I have an HP terminal that I use to connect to Ultrix and VMS >systems (thru modem). On Ultrix i have no problem but on VMS you need to define one of the terminal types FT1 through FT8 to be a HP terminal. _________________________________ Lance R. Bailey, Systems Manager | Robarts Research Institute email: lrb@rri.uwo.ca | Clinical Trials Resources Group vox: 519-663-3787 ext. 4108 | P.O. Box 5015, 100 Perth Dr. fax: 519-663-3789 | London, Canada N6A 5K8