pcm@bby.oz (Paul C. McLeish) (09/28/90)
I'm trying to run Windows 3.0 Terminal in VT100 mode, on an NEC
Powermate SX. Following the Microsoft Windows User Guide Appendix C,
I wrote the following termcap:
dZ|winterm|Windows 3.0 terminal in vt100 mode:\
:co#80:li#24:bs:\
:cm=\E[%2;%2H:CM=\E[%2;%2f:cs=\E[%2;%2r:ho=\E[;H:\
:sc=\E7:rc=\E8:sf=\ED:sr=\EM:\
:up=\E[A:do=\E[B:nd=\E[C:le=\E[D:\
:UP=\E[%dA:DO=\E[%dB:RI=\E[%dC:LE=\E[%dD:\
:cd=\E[0J:ce=\E[0K:cb=\E[1K:cl=\E[2J:dc=\E[P:DC=\E[%dP:\
:IC=\E[%d@:AL=\E[%dL:\
\
:dl=\E[M:DL=\E[%dM:\
\
:bo=\E[1m:eb=\E[m:us=\E[4m:ue=\E[m:bl=\E[5m:be=\E[m:\
:rv=\E[7m:re=\E[m:ea=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?7l\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:ld=\E)0:ls=\016:le=\017:\
:qa=j:qb=k:qc=l:qd=m:qe=n:qf=q:qg=t:qh=u:qi=v:qj=w:qk=x:\
:ky:kn#18:k0=\EOp:k1=\EOM:k2=\EOl:k3=\EOm:k4=\EOq:k5=\EOr:\
:k6=\EOs:k7=\EOt:k8=\EOu:k9=\EOv:kA=\EOw:kB=\EOx:kC=\EOP:\
:kD=\EOQ:kE=\EOR:kF=\EOS:kG=\EOy:kH=\EOn:ku=\EOA:kd=\EOB:\
:kr=\EOC:kl=\EOD:
which doesn't work. The most glaring problem is with the delete a
line sequence. According to the manual, \E[M should delete a line.
However, this doesn't seem to work. I have tried
/usr/5bin/echo "\033[M"
and it just doesn't work. This makes the Terminal completely
unusable. Someone, somewhere, *must* have solved this one!
I posted a similar request about 2 months ago, and got a few `me-too's
asking me to pass on anything that I received, but the only termcap
that I got was even worse than the one above.
Microsoft support claim that they've got a working termcap, but they
refused to send me a copy.
Pleeeeeaaaasseeeeee send it if you've got it working. We are
desperate!
--
------------------------------------------------------------------------------
Paul McLeish, Burdett Buckeridge & Young Ltd, Melbourne, Australia
Internet: pcm@melba.bby.oz.au non-MX: pcm%melba.bby.oz@uunet.uu.net
Uucp: {uunet,mnetor,pyramid,ubc-vision,ukc,mcvax,...}!munnari!melba.bby.oz!pcm
Phone: +61 3 614 8922
Fax: +61 3 614 8742
"It takes 3 pigs with dermatitis to make one packet of pork scratchings"
Who Dares Winsgwyn@smoke.BRL.MIL (Doug Gwyn) (09/29/90)
In article <PCM.90Sep28112254@bottle.bby.oz> pcm@bby.oz (Paul C. McLeish) writes: >line sequence. According to the manual, \E[M should delete a line. Yes, that's the correct ANSI X3.64 sequence. Also try ESC [ 1 M.
frank@urz.unibas.ch (10/01/90)
In article <PCM.90Sep28112254@bottle.bby.oz>, pcm@bby.oz (Paul C. McLeish) writes: > I'm trying to run Windows 3.0 Terminal in VT100 mode, on an NEC ^^^^^ > Powermate SX. Following the Microsoft Windows User Guide Appendix C, > I wrote the following termcap: > If it's a "good" (exact) emulator, then deleting/inserting a line is NOT possible! The dumb vt100 from DEC did not have this facility! The vt102 was the first terminal with this facility. > Microsoft support claim that they've got a working termcap, but they > refused to send me a copy. Well, if it realy only emulates the vt100 then the above claim is a lie... -Robert