gfl@vexpert.uucp (Gerhard Fleischanderl) (03/22/90)
We have troubles with mail-transfer via UUCP. When we call our relay-host (running our uucico in master-mode) to send mails to the relay-host, the data-file of the first message is transferred correctly. The work-file is also transferred, but the slave-uucico does not send a "copy complete". Instead, "alarm" is reported by uucico. At the end of this message, I give the relevant sections from /var/spool/uucp/LOGFILE and from uucico's output. Our host is a SPARCstation1 (SunOS 4.0.3c), the relay-host runs Ultrix 3.0. Any help is appreciated. Thanks a lot. Gerhard Fleischanderl Institut fuer Angewandte Informatik, Technical University Vienna Paniglgasse 16, A-1040 Vienna, Austria e-mail: gfl@vexpert.uucp ########## /var/spool/uucp/LOGFILE ########## root relay (3/22-9:47-14587) SUCCEEDED (call to relay ) root relay (3/22-9:47-14587) OK (startup) gfl relay (3/22-9:47-14587) REQUEST (S D.relayB063d D.relayB063d gfl) gfl relay (3/22-9:47-14587) REQUESTED (CY) gfl relay (3/22-9:47-14587) REQUEST (S D.myhostX063b X.myhostX063b gfl) gfl relay (3/22-9:49-14587) BAD READ (expected 'C' got FAIL) gfl relay (3/22-9:49-14587) FAILED (conversation complete) ########## output from "/usr/lib/uucp/uucico -r1 -x9 -srelay" (for transfer of work-file) ########## *** TOP *** - role=1, wrktype - S wmesg 'S' D.myhostX063b X.myhost send 212 rmesg - 'S' rec h->cntl 41 state - 10 rec h->cntl 37777777631 send 43 got SY PROCESS: msg - SY SNDFILE: send 223 send 333 sent data 64 bytes 0 secs rmesg - 'C' alarm 1 send 223 alarm 2 send 223 [alarms deleted] alarm 10 send 223 tries = 10 got FAIL send 333 send 43 send 10 send 10 cntrl - -1 send OO -1,imsg >