wengland@stephsf.stephsf.com (Bill England) (06/23/91)
I've just installed a Digiboard PC4e on stephsf with the idea that
I could increase my Tbit throughput. I've successfully increassed
simple uucp file transfers by almost 2.5 times. The news transfers
however remain at about the same level they were before.
Is this slow news transfer from uunet normal ?
Is there a problem with my Uucp/Digiboard/T2500 configuration ?
I've tried about every config change I can think of. Any suggestions
would be very much appreciated.
Thanks,
Bill England
wengland@stephsf.com
-----------
Uucp useage example:
Incoming Outgoing
User System Nfiles Size Time Nfiles Size Time CPS
klm gozer 4 5513 00:00:11 5 93456 00:01:07 1260.5
mmdf gozer 0 0 00:00:00 8 7566 00:00:04 1839.5
mmdf uunet 0 0 00:00:00 34 25095 00:00:14 1813.9
news uunet 386 7550518 02:58:00 0 0 00:00:00 706.9
Why so slow ? ^^^^^^
operator uunet 2 1879 00:00:05 0 0 00:00:00 366.1
rick uunet 2 4500 00:00:11 0 0 00:00:00 419.9
root uunet 2 435312 00:08:35 0 0 00:00:00 845.6
slc uunet 2 943 00:00:04 0 0 00:00:00 269.4
uucp sosco 1 15568 00:00:11 0 0 00:00:00 1361.7
uucp uunet 52 82220 00:03:06 0 0 00:00:00 442.0
wengland uunet 2 78994 00:00:59 4 2929 00:00:02 1341.6
{ I am turning on rtspace ctspace on the digiboard,
{ The Digiboard/Tbit can not transfer at high rates at all
{ without turning on rtspace.
# ditty ttyi1A
[...]
-forcedcd fastcook -altpin -fastbaud (9600)
rtspace -dtrpace ctspace -dsrpace -dcdpace
DTR+ RTS+ CTS+ CD- DSR+ RI-
[...]
T2500 config:
S41:002 S48:001 S51:005 S52:002 S54:003 S58:002 S61:045 S66:001
S110:000 S111:030 S131:001
And the dialer sets the following Tbit registers:
S110=1 S121=1 S95=0 S50=255
--
+- Bill England, wengland@stephsf.COM -----------------------------------+
| * * H -> He +24Mev |
| * * * ... Oooo, we're having so much fun making itty bitty suns * |
|__ * * ___________________________________________________________________|