katsumi@muse.sonytek.JUNET (Kenichi Katsumi) (03/28/88)
We installed 2.10bsd on pdp11/44. I could make non networking kernel, but I could not make networking kernel. ( I have excelan's ethernet board, then I convert driver program if_ex.c from 4.3bsd. but compile was exit by checksys program. I attempt to make kernel which has deuna driver, but could not. ) Who is made networking kernel? How do I make networking kernel? See follows error message: ------------------------------------------------------------------------------- size unix text data bss dec hex 49152 8258 37842 95252 17414 total text: 137152 overlays: 7872,7488,8128,6912,7296,7616,8768,7616,7104,7232,6656,4800,512 ./checksys unix ./checksys: base segment is 49152, min is 49152, too small by 0 bytes. ./checksys: overlay 7 is 8768, max is 8192, too large by 576 bytes. System will occupy 186368 bytes of memory (including buffers and clists). end {0000000} bsize {0020040} nbuf {0020042} buf {0056172} nproc {0020026} proc {0115610} ntext {0020030} text {0130524} nfile {0020034} file {0126214} ninode {0020032} inode {0022114} ncallou {0020036} callout {0066234} ucb_cli {0111652} nclist {0020044} noka5 {0111654} **** SYSTEM IS NOT BOOTABLE. **** *** Exit 2 Stop. ------------------------------------------------------------------------------- pdp11/44 configration. CPU PDP11/44 MEMORY 3.25Mbytes DISK RM02 emulate (Fujitsu M2211L,Control board Emulex SC11 Fujitsu M2294,Control board Western Peripherl DC-231) RL01 MAGTAPE TM11 Compatible SIRIAL-INTERFACE DZ-11 ETHERNET-BOARD EXCELAN EXOS204 Kenichi Katsumi (katsumi@muse.sonytek.junet) Scientific Computing System Management Division. SONY/Tektronix Corp. (In Japan)