tvdl@bsiao.UUCP (Timo van der Laan) (11/04/88)
Index: sys/vaxif/if_np.c if_ix.c 4.3BSD
Description:
Our ethernet connection with an IBM 9370 regularly generates
ixrint errors. The diagnostic printed on the console says:
"ixrint: cqe error 1, 106, 0"
We are certain that this is caused by the VAX as these errors
also occur when the ethernet is disconnected from the IBM with
the VAX running single user.
The real problem is that from time to time it is impossible
to work with the ethernet connection from the VAX-side.
In those cases NO packets are put on the ethernet and an ftp
call (VAX-side) will hang.
If we then start ftp from the IBM-side the problem disappears.
Configuration:
VAX11/750 with Interlan Np100 10 Mb/s Ethernet interface
System BSD4.3.
Our Interlan device is located at address 0162000.
(In our configuration file:
device np0 at uba? csr 0162000 vector npintr
Changes in if_np.c:
101c101
< u_short npstd[] = { 0162000, 0162020, 0 };
---
> u_short npstd[] = { 0166000, 0166020, 0 };
)
--
If anyone can help us please reply via mail:
Timo van der Laan, Postbank N.V., room 4.97 ...mcvax!bsiao!tvdl
Pb 21009
1000 EX AMSTERDAM Phone: + 31 20 5843175