hliu@pollux.usc.edu (Huan Liu) (09/10/88)
Hello, We have the following problem: We have a TI explorer with 4 mb which has a host name "s1". It worked fine, i.e., it had correct network configuration and could talk to other systems. After we installed Knolwdge Craft, it did not work well. Under "network configuration", the command "set host name" showed that the machine has the correct name "s1", however, when using "edit hosts name", "s1" did not show in the known host list. Therefore, we tried to add host "s1" into the list, but "verifying network configuration" showed that the s1 has the associted machine s1, that is not a file server, and s1 has the sys host s1, which is not a file server. That means we failed to add the host name. The consequence of failure is we can not access to the files on the machine s1. As you know, we can use multiple menu to switch KC or not. The above case occured when we switched to KC only. The major cause is the limit of memory. However, we have another TI which works fine with KC. Any suggestions would be appreciated. Please e-mail hliu@pollux.usc.edu. Thank you. Huan Liu